Results

Triton Double Drain / Platon Double Drain

Drainage and protection cavity membrane used externally against retaining walls and across terraces and podiums. Triton Double Drain / Platon Double Drain protects the primary waterproofing membrane from damage during back-filling or covering whilst maintaining a clear space which allows water to de-pressurise and drain freely. Triton Double Drain / Platon Double Drain is used in conjunction with a maintainable land drain to reduce the risk of water pressure build up as part of a specification which can comply with the guidance laid out in BS 8102:2009.

Trimotic

Trimotic is a chemical-free damp proofing system that utilises the principle of Electro-Osmosis. This occurs when an electric potential is applied across a damp porous material which causes a force to be exerted on the water which then moves towards the cathode (earth). The system involves inserting platinum coated titanium wire anodes into the wall at regular intervals.

Triton Shield Stretch Tape

A unique, stretchable, waterproof and gas proof sealing tape. Triton Shield Stretch Tape speeds up membrane installation by conforming to the shape of curved, convex or concave profiles. Suitable for use in the installation of damp proofing, waterproofing and gas proofing membranes, this highly versatile tape can be used at the wall/floor junction; to seal abutting or overlapping membrane edges, or wherever a seal is needed around awkward, contoured or shaped corners. Up to a 90o turn is achievable without the need to cut the self-adhesive tape.

Ancillaries – Cavity Drain Membranes

Triton supplies a full range of fixings and other ancillary products used in the installation of Cavity Drain Membrane systems. This range includes an Anti-lime Coating designed to seal concrete surfaces and to prevent the leaching of ‘free lime’ and a combined Basement Board insulation and spacing layer. Prior to the installation of a cavity drain system, please download the ‘Fixing & Sealing Product Calculator’ below.

Triton TGS-GM500

TGS-GM500 is a BBA certified, high quality, single layer membrane designed to be used as a damp proof membrane and to prevent the ingress of Radon gas when used in the construction of buildings and dwellings. Supplied in multi folded 4m x 20m rolls which are easy to handle and transport.

Triton TWS-EX100GM (Gas Membrane)

TWS-EX100GM is a self-adhesive membrane designed for use as a barrier against Methane and Radon gases. It also acts as a Type A waterproofing barrier.The aluminium primary barrier is reinforced and protected by the HDPE film laminated to one side and a robust bitumen rubber compound to the other.

Triton TT Vapour Membrane (Protection from Ground Gas)

A ready blended coating that once cured, provides a waterproof Radon, Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.

Ancillaries – Ground Gas

Triton supplies a full range of ancillary products for the installation of ground gas barrier systems. This range includes a venting mat, a Radon sump, primers, tapes and top hats. Situations where the Fillet Seal will be employed should already have been prepared in accordance with the slurry coating or render specification. In the majority on instances, the Fillet Seal will be applied on to the slurry coated surface.

Protection from Ground Gas – Further reading

Triton has compiled useful information and guidance on Ground Gas risks and protection measures. Please find below BRE reports for protective and remedial measures. BRE Report BR211 Radon: Protective measures for new buildings. BRE Report BR343 Radion: Remedial measures in existing dwellings (dwellings with cellars and basements).

Triton Home Dry Vents

A choice of two passive ventilation units (airbrick ventilator and core drill ventilator) that incorporate triple action filters and specially designed thermal cores for minimal heat loss. Triton Home Dry units are designed to ventilate bedrooms and living rooms where the constant background ventilation they provide allows water vapour to escape. One air brick ventilator is usually sufficient for a single room of up to 20m2 floor area, alternatively two core drill ventilators can be installed.

Isola Mestertekk

Mestertekk is a high quality single ply SBS modified bituminous roofing felt. Isola Mestertekk can be applied to all types of roofs, industrial buildings, blocks of flats and domestic housing, both on flat or pitched roofs. Isola Mestertekk is loose laid and mechanically fixed, and when used on refurbishment contracts can be applied over the original covering with minimal preparation. Isola Mesertekk is available in a range of colours – please contact Triton for more information.

Triton TWS-EX100

Being water and vapour resistant, TWS-EX100 has many waterproofing applications including foundations, basements, roofs and decks, lift shafts and pits, car parks, subways, bathrooms and balconies. A unique feature is its selvedge that enables a fast and secure seal on all side edge laps.

Triton Elegance

A high performance, energy efficient 3-speed axial fan offering lowest energy consumption of its type in the UK. The unit provides low level continuous ventilation to control condensation. Suitable for installation in wall, ceiling or window (with additional window kit) in any domestic room. Can be speed boosted to maximum using integral pull cord or by remote switch/PIR sensor or dynamic remote humidistat. Features anti-turbulence deflectors to ensure very low noise levels and optimum performance. Compliant with Building Regulations Parts L1 2010 and F 2010 and IPX4 splashproof rated for safe installation in Zones I and II.

Triton Anti-Mould Emulsion

Triton Anti-mould Emulsion is a premium quality, low odour anti-mould coating which is guaranteed to protect against Black Mould even in cases of persistent condensation. The anti-mould biocide is combined throughout the paint film, which is formulated to impart toughness, elasticity, water resistance and durability to the surface finish.

Triton Surface Cleanser

Designed primarily to prepare and cleanse surfaces prior to the use of Triton Anti-Mould Emulsion. Supplied as a concentrate for dilution with water (1 part concentrate to 19 parts water by volume), the concentrate contains <10% w/w Quaternary Ammonium Halide dissolved in water.

Triton Aqua Pump Pro

The Triton Aqua Pump Pro is specially designed for the removal of ground water from basement cavity drain membrane systems. Comprising polyethylene sump, locking access cover and a powerful submersible pump, the system is very versatile enabling installers to locate inlets to their specifications.

Platon Xtra for pitched roofs

Platon Xtra has been used in pitched turf roof constructions for over 20 years. Aging tests indicate that the Platon membrane has an expected life of at least 50 years. The Platon membrane, the main component in the system, is manufactured from HDPE, a material that is water repellent and resistant to chemicals. The Platon membrane combined with other components, creates a complete Earth Covered Roof System.

Trimol 15 Lightweight Mortar

A 3-component system which provides a cold or warm setting, lightweight, low slump filler for use in non-structural applications.

Ideal for fast repair of concrete in vertical and overhead work and rapidly attains mechanical strength sufficient to exceed that of good quality concrete.

Triton Aqua Pump Pro Plus

The Triton Aqua Pump Pro Plus is identical to the Aqua Pump Pro system above but is supplied with two mains powered pumps. These can be plumbed to either a single discharge outlet or to two separate outlets from the sump. The second mains pump is located on the raised foot within the chamber and provides back up to the primary pump and additional capacity to the system if required.