A unique chemical treatment for the waterproofing, protection of concrete and increase durability – designed to be used as an admix at the time of batching. The active chemicals react with fresh concrete to generate a non-soluble crystalline formation which actively seals the concrete itself against the penetration of water or liquid, protecting it from the deterioration effect of harsh environmental conditions.
A ready blended coating that once cured, provides a waterproof Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.
Triton TT55 ME is a two component polymer modified cement based, flexible, protective and waterproof membrane coating. It is suitable for either vertical or horizontal surfaces and ideal for areas which are liable to cracking or deformation on the surface, and can be successfully used at wall/floor junctions. The polymer emulsion additive imparts high adhesion and flexibility along with its own high level of water resistance. It is suitable for the internal and external waterproofing of concrete, sound brickwork and cement based elements of water retaining and water resisting structures such as basements, retaining walls, lift pits, swimming pools, construction joints, underpinning joints, balcony decks, bund linings or terraces etc.
A single component, polymer modified cement “tanking” system for walls and floors, designed to be applied as a waterproof slurry. TT 55 is a highly effective damp proof membrane for brickwork, concrete or any cementitious substrate. Surfaces to be treated with TT55 should be correctly prepared, free from all loose materials and contaminants and be in a sound and solid condition. For application to floors, TT55 should be applied directly to the structural slab. For wall applications, TT55 should be sandwiched between sand/cement render coats. For all TT55 applications, special attention should be given to wall/floor junctions.
A surface applied system which waterproofs and protects concrete in depth. Supplied as a powder which only needs mixing with water before application on: basements/retaining walls, concrete slabs (floor/roof/balcony), construction joints, water retaining structures, swimming pools, reservoirs, sewage treatment plants, channels and potable water tanks. When applied to a concrete surface, the active chemicals combine with the free lime and moisture present in the capillary tract to form insoluble crystals which block capillaries and minor shrinkage cracks to prevent any further water ingress (even under pressure). However the product still allows the passage of water vapour through the structure, allowing the concrete to ‘breathe’. It also protects concrete against seawater, aggressive ground water and certain chemical solutions.
Drainage and protection cavity membrane used externally against retaining walls and across terraces and podiums. Triton Double Drain / Platon Double Drain protects the primary waterproofing membrane from damage during back-filling or covering whilst maintaining a clear space which allows water to de-pressurise and drain freely. Triton Double Drain / Platon Double Drain is used in conjunction with a maintainable land drain to reduce the risk of water pressure build up as part of a specification which can comply with the guidance laid out in BS 8102:2009.
Being water and vapour resistant, TWS-EX100 has many waterproofing applications including foundations, basements, roofs and decks, lift shafts and pits, car parks, subways, bathrooms and balconies. A unique feature is its selvedge that enables a fast and secure seal on all side edge laps.
A crystalline waterproofing admixture with hydrophobic effects. Triton Liquid Waterproofer is a liquid admixture for designing a water-tight concrete with innovative ‘2 in 1’ technology.
TWS-EX100GM is a highly efficient waterproofing membrane which also acts as a barrier to Radon, Methane, Carbon Dioxide and other ground gases and contaminants. The self adhesive membrane uses aluminium as the primary barrier, which is reinforced and protected by a laminated film of biaxually oriented HDPE film to one side and a robust bitumen rubber to the other. A selvedge of bitumen rubber facilitates easier lap seals.
Can't find what you're looking for? We can help.