A single pack, moisture curing elastomeric resin. The membrane cures in a continuous and elastic form, as a totally adhered layer. The waterproofing layer guarantees total watertightness and withstands building movements. Can be used as a base coat, reinforcing layer or top coat. Typical applications include low pitch and flat roof areas with pedestrian traffic, wet rooms, kitchens, lightly trafficked flooring, water channels and ponds.
A fast setting, hand applied, two pack Polyurea elastomeric resin. Designed as a high strength rigid material for use as a coating on to prepared concrete. Typical applications include waterproofing of roofs, balconies, flooring, lift pits, gutters etc where high abrasion resistance, flexibility and durability are required.
An extra fast curing, two pack Polyurea elastomeric resin with crack bridging capability. Application only by twin nozzle, heated spray unit. Typical applications include pitched and flat roofs, sewage/waste water plants, on-site applied liners, ponds, landfills, tunnels etc.
TT Vapour Membrane is a ready blended coating that once cured, provides a waterproof Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.
Triton supplies a full range of ancillary products for the installation of roofing and decking systems. This range includes a cement based sealing product, a reinforcing fabric and surface primers. In most circumstances, polyurethane resins, thanks to their chemical cross linking (as opposed to physical curing water based products), provide excellent adhesion to substrates. However, the very high cohesion of these polymers, may contribute to a lack of adhesion and eventual failure on difficult substrates such as metals or non-porous ceramics.