Results
Triton Home Dry Vents
A choice of two passive ventilation units (airbrick ventilator and core drill ventilator) that incorporate triple action filters and specially designed thermal cores for minimal heat loss. Triton Home Dry units are designed to ventilate bedrooms and living rooms where the constant background ventilation they provide allows water vapour to escape. One air brick ventilator is usually sufficient for a single room of up to 20m2 floor area, alternatively two core drill ventilators can be installed.
find out more
Triton Elegance
A high performance, energy efficient 3-speed axial fan offering lowest energy consumption of its type in the UK. The unit provides low level continuous ventilation to control condensation. Suitable for installation in wall, ceiling or window (with additional window kit) in any domestic room. Can be speed boosted to maximum using integral pull cord or by remote switch/PIR sensor or dynamic remote humidistat. Features anti-turbulence deflectors to ensure very low noise levels and optimum performance. Compliant with Building Regulations Parts L1 2010 and F 2010 and IPX4 splashproof rated for safe installation in Zones I and II.
find out more
Triton Anti-Mould Emulsion
Triton Anti-mould Emulsion is a premium quality, low odour anti-mould coating which is guaranteed to protect against Black Mould even in cases of persistent condensation. The anti-mould biocide is combined throughout the paint film, which is formulated to impart toughness, elasticity, water resistance and durability to the surface finish.
find out more
Triton Surface Cleanser
Designed primarily to prepare and cleanse surfaces prior to the use of Triton Anti-Mould Emulsion. Supplied as a concentrate for dilution with water (1 part concentrate to 19 parts water by volume), the concentrate contains <10% w/w Quaternary Ammonium Halide dissolved in water.
find out more
Triton Aqua Pump Pro Plus
The Triton Aqua Pump Pro Plus is identical to the Aqua Pump Pro system above but is supplied with two mains powered pumps. These can be plumbed to either a single discharge outlet or to two separate outlets from the sump. The second mains pump is located on the raised foot within the chamber and provides back up to the primary pump and additional capacity to the system if required.
find out more
Platon DE25/DE40
Platon DE25 and DE40 membranes are designed for the construction of flat green areas on top of buildings and underground structures such as car parks and garages. They are laid between the waterproofing and soil layer. Their stud design provides an excellent function that combines drainage and water storage as one efficient system. Platon DE40 is designed for installation where high capacity water storage is required.
find out more