Waterproofing Concrete Ancillaries
Triton supplies a full range of ancillary products for waterproofing concrete. A pre-packed modified cement based repair mortar for use with concrete, render and screed repairs. Use with Triton LPA/Primer as both a primer to the repair area and as a gauging solution for mixing the Triton Repair Mortar and to enhance the flexural strength of the mix. Typical areas of use would include repairs to honeycombed concrete, leaking construction joints (Triton Quick Set also required), spalled concrete and repairs to screeds and renders.
Triton Repair Mortar
A pre-packed modified cement based repair mortar for use with concrete, render and screed repairs. Use with Triton LPA/Primer as both a primer to the repair area and as a gauging solution for mixing the Triton Repair Mortar and to enhance the flexural strength of the mix.
Typical areas of use would include repairs to honeycombed concrete, leaking construction joints (Triton Quick Set also required), spalled concrete and repairs to screeds and renders.
Available in 10 kg packs.
Triton Colflex
Quick setting plug
TT super
A surface applied system which waterproofs and protects concrete in depth. Supplied as a powder which only needs mixing with water before application on: basements/retaining walls, concrete slabs (floor/roof/balcony), construction joints, water retaining structures, swimming pools, reservoirs, sewage treatment plants, channels and potable water tanks.
When applied to a concrete surface, the active chemicals combine with the free lime and moisture present in the capillary track to form insoluble crystals which block capillaries and minor shrinkage cracks to prevent any further water ingress (even under pressure). However the product still allows the passage of water vapour through the structure, allowing the concrete to ‘breathe’. It also protects concrete against seawater, aggressive ground water and certain chemical solutions. Two versions of this product are available, please refer to the chart below before specification:
| Triton TT Super | Triton TT Super (White) | |
|---|---|---|
| colour: | Cement Grey | White |
| Withstand Water Pressure: | >12 bars @ 28 days | >7 bars @ 28 days |
| Bulk Density: | Approx. 1.25 | Approx. 1.20 |
| Setting Time: | 60 minutes | 120 – 180 minutes |
Trimol 23
Professional Products – Wood Preservation & Damp Proof Systems picture
Shakes stitched with steel dowels set in Trimol 23
Designed for building and civil engineering applications where a thixotropic (negligible slump) adhesive or primer is required. A 2-component solvent-free adhesive, Trimol 23 can be applied in cold, damp conditions and will remain in place on vertical or inverted surfaces. Forms a strong bond to wood, metals, glass reinforced plastics and laminates.
Supplied in 0.66 litre packs.
