Results

Triton TT Vapour Membrane

A ready blended coating that once cured, provides a waterproof Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.

Triton Triseal

Triseal is a solvent free, two part epoxy resin coating, typically used as a surface damp proof membrane and a water vapour suppressant. Ideal for use beneath raised access floors, in plant rooms and bunded areas. It is also suitable for application on damp surfaces, such as sand/cement and cement floors subject to rising damp or containing residual construction moisture. Triseal can be used as a general purpose coating for surfaces subject to foot and light wheeled traffic. Triseal can be applied using a brush or medium pile roller onto sound, clean surfaces.

Triton TWS–Fastcoat

A single pack, moisture curing elastomeric resin. The membrane cures in a continuous and elastic form, as a totally adhered layer. The waterproofing layer guarantees total watertightness and withstands building movements. Can be used as a base coat, reinforcing layer or top coat. Typical applications include low pitch and flat roof areas with pedestrian traffic, wet rooms, kitchens, lightly trafficked flooring, water channels and ponds.

Triton TWS-Poly H

A fast setting, hand applied, two pack Polyurea elastomeric resin. Designed as a high strength rigid material for use as a coating on to prepared concrete. Typical applications include waterproofing of roofs, balconies, flooring, lift pits, gutters etc where high abrasion resistance, flexibility and durability are required.

Triton TWS–Poly S

An extra fast curing, two pack Polyurea elastomeric resin with crack bridging capability. Application only by twin nozzle, heated spray unit. Typical applications include pitched and flat roofs, sewage/waste water plants, on-site applied liners, ponds, landfills, tunnels etc.

Trimol 40

A two component water based expoxy coating for floors and walls. Trimol 40 is typically used to provide a damp proof membrane on walls and floors either on its own as a wearing surface or in a “sandwich” construction between sand and cement renders. Can be applied to brick, concrete, stone and cement renders when damp.

Ancillaries – Flooring

Triton supplies a full range of ancillary products for the installation of liquid applied and sheet membrane flooring systems. This range includes primers, reinforcing tapes, a cement based sealing product and a repair mortar.