A unique chemical treatment for the waterproofing, protection of concrete and increase durability – designed to be used as an admix at the time of batching. The active chemicals react with fresh concrete to generate a non-soluble crystalline formation which actively seals the concrete itself against the penetration of water or liquid, protecting it from the deterioration effect of harsh environmental conditions. Shrinkage cracks within design tolerances are constantly resealed creating a life-time active protection system. The use of Triton TT Admix within the concrete complies with BS8102 and is categorised as Type B. TT Admix is acceptable as a designated line of defence as required by leading buildings insurers.
Triton TT55 ME is a two component polymer modified cement based, flexible, protective and waterproof membrane coating. It is suitable for either vertical or horizontal surfaces and ideal for areas which are liable to cracking or deformation on the surface, and can be successfully used at wall/floor junctions. The polymer emulsion additive imparts high adhesion and flexibility along with its own high level of water resistance. It is suitable for the internal and external waterproofing of concrete, sound brickwork and cement based elements of water retaining and water resisting structures such as basements, retaining walls, lift pits, swimming pools, construction joints, underpinning joints, balcony decks, bund linings or terraces etc.
A surface applied system which waterproofs and protects concrete in depth. Supplied as a powder which only needs mixing with water before application on: basements/retaining walls, concrete slabs (floor/roof/balcony), construction joints, water retaining structures, swimming pools, reservoirs, sewage treatment plants, channels and potable water tanks. When applied to a concrete surface, the active chemicals combine with the free lime and moisture present in the capillary tract to form insoluble crystals which block capillaries and minor shrinkage cracks to prevent any further water ingress (even under pressure). However the product still allows the passage of water vapour through the structure, allowing the concrete to ‘breathe’. It also protects concrete against seawater, aggressive ground water and certain chemical solutions.
A single pack, moisture curing elastomeric resin. The membrane cures in a continuous and elastic form, as a totally adhered layer. The waterproofing layer guarantees total watertightness and withstands building movements. Can be used as a base coat, reinforcing layer or top coat. Typical applications include low pitch and flat roof areas with pedestrian traffic, wet rooms, kitchens, lightly trafficked flooring, water channels and ponds.