A unique chemical treatment for the waterproofing, protection of concrete and increase durability – designed to be used as an admix at the time of batching. The active chemicals react with fresh concrete to generate a non-soluble crystalline formation which actively seals the concrete itself against the penetration of water or liquid, protecting it from the deterioration effect of harsh environmental conditions. Shrinkage cracks within design tolerances are constantly resealed creating a life-time active protection system. The use of Triton TT Admix within the concrete complies with BS8102 and is categorised as Type B. TT Admix is acceptable as a designated line of defence as required by leading buildings insurers.
A BDA certified, pre-formed waterstop available in a ready to use roll which swells up to 270% when in contact with water. When fully encapsulated by poured concrete, the expansive forces form a seal against concrete surfaces to resist hydrostatic pressure and to stop water from entering the sub-structures. Triton TT Waterstop returns to its original size if the concrete and substrate is completely dry but re-expands to seal the potential leaking joints when water or moisture is re-introduced. Its service life is indefinite with a permanent water tight function and excellent resistance to acid and alkaline conditions. The product is extruded in a rectangular shape for optimal adhesion. The built in delay system means Waterstop will activate approximately two days after constant exposure to water and will resist in excess of 6 bar hydrostatic pressure.
A range of one-step seals for formwork spacers and pipes, designed to offer a more effective, quick and secure sealing solution than mastic or a length of water bar – both of which can be dislodged during the concrete pour.
TRITON CEMflex VB Plate Waterstop is a galvanized steel plate encapsulated in a special patented coating that reacts only with the water within the concrete to provide a watertight joint. It is designed for use in all non-movement construction joints in reinforced concrete – and is especially suited to ICF or twin wall installations.
A gun applied, one-component hydro-reactive expansion sealant for waterproofing joints in concrete. It will swell up to 100% when in contact with water to create a durable waterstop with long lasting adhesive and hydro-swelling properties. In contact with sea water, Triton TT Swellmastic S2 will expand between 50% and 70%.
A crystalline waterproofing admixture with hydrophobic effects. Triton Liquid Waterproofer is a liquid admixture for designing a water-tight concrete with innovative ‘2 in 1’ technology.
The Triton Injection Tube has been designed for the multiple injection of suitable grouts into construction joints and other areas that may require injection at a later date. Constructed from a specially formulated plastic, it’s flexible nature allows it to follow contours.
Triton supplies a full range of ancillary products used in the installation and repair of Watertight Concrete Systems. The range includes a quick setting mortar, sealing systems and adhesives. A surface applied system which waterproofs and protects concrete in depth. Supplied as a powder which only needs mixing with water before application on: basements/retaining walls, concrete slabs (floor/roof/balcony), construction joints, water retaining structures, swimming pools, reservoirs, sewage treatment plants, channels and potable water tanks.