The Triton Aqua Pump Pro is specially designed for the removal of ground water from basement cavity drain membrane systems. Comprising polyethylene sump, locking access cover and a powerful submersible pump, the system is very versatile enabling installers to locate inlets to their specifications.
The Triton Aqua Pump Pro Plus is identical to the Aqua Pump Pro system above but is supplied with two mains powered pumps. These can be plumbed to either a single discharge outlet or to two separate outlets from the sump. The second mains pump is located on the raised foot within the chamber and provides back up to the primary pump and additional capacity to the system if required.
The Aqua Pump Pro Battery Back Up system comprises a polyethylene sump, locking access cover, powerful submersible pump, 24v back up pump and control panel. It is designed for use where primary pump failure through mechanical fault of loss of mains power would be catastrophic.
The Triton Aqua Pump XL kit can be specified for where a greater ingress of water is anticipated, where there is a greater depth to the basement or to enable the number of pumps to be reduced.
The Triton Aqua Pump Kit is a complete, ready to use water control system. The Triton Aqua Pump Kit is located in the floor at the lowest point in the basement and nearest to a suitable point of discharge for the pump. The sump lid is capable of accepting foot traffic and is easily removed for maintenance and servicing access. Full installation guidelines are provided and these should be read carefully before installation.
Triton recommends the use of two pumps in each sump to guard against mechanical failure. The Triton Aqua Pump Plus Kit comes with identical elements to the Triton Aqua Pump Kit with the addition of a second mains powered pump. This provides both back up to the first pump and increased capacity within the sump if required. To maximise capacity of the pumps they should be linked to separate discharge pipes.