Results
Triton TM3 Mesh / Platon PB2 Mesh Membrane
A 3mm polypropylene cavity drain membrane suitable for direct plastering. Suitable for use as an isolating plaster membrane following remedial treatments.
find out more
Tri-Rend
A waterproofing and plasticizing additive for sand and cement renders and mortars. Improves the workability of the mix and reduces the amount of water required to provide a workable mix therefore producing a more dense render. Recommended for use in replastering of walls affected by rising dampness. Supplied in concentrate form in 25 litre containers.
find out more
Triton Double Drain / Platon Double Drain
Drainage and protection cavity membrane used externally against retaining walls and across terraces and podiums. Triton Double Drain / Platon Double Drain protects the primary waterproofing membrane from damage during back-filling or covering whilst maintaining a clear space which allows water to de-pressurise and drain freely. Triton Double Drain / Platon Double Drain is used in conjunction with a maintainable land drain to reduce the risk of water pressure build up as part of a specification which can comply with the guidance laid out in BS 8102:2009.
find out more
Trimotic
Trimotic is a chemical-free damp proofing system that utilises the principle of Electro-Osmosis. This occurs when an electric potential is applied across a damp porous material which causes a force to be exerted on the water which then moves towards the cathode (earth). The system involves inserting platinum coated titanium wire anodes into the wall at regular intervals.
find out more
Triton Shield Stretch Tape
A unique, stretchable, waterproof and gas proof sealing tape. Triton Shield Stretch Tape speeds up membrane installation by conforming to the shape of curved, convex or concave profiles. Suitable for use in the installation of damp proofing, waterproofing and gas proofing membranes, this highly versatile tape can be used at the wall/floor junction; to seal abutting or overlapping membrane edges, or wherever a seal is needed around awkward, contoured or shaped corners. Up to a 90o turn is achievable without the need to cut the self-adhesive tape.
find out more
Ancillaries – Cavity Drain Membranes
Triton supplies a full range of fixings and other ancillary products used in the installation of Cavity Drain Membrane systems. This range includes an Anti-lime Coating designed to seal concrete surfaces and to prevent the leaching of ‘free lime’ and a combined Basement Board insulation and spacing layer. Prior to the installation of a cavity drain system, please download the ‘Fixing & Sealing Product Calculator’ below.
find out more
Damp Proofing & Replastering Ancillaries
Ancillaries for damp proofing includes polymer emulsion based primers and additives for cement renders and mortars, a pre-packed Fillet Seal mortar, salt neutraliser and fixings and tape seals for PB2 Mesh.
find out more
Triton TGS-GM500
TGS-GM500 is a BBA certified, high quality, single layer membrane designed to be used as a damp proof membrane and to prevent the ingress of Radon gas when used in the construction of buildings and dwellings. Supplied in multi folded 4m x 20m rolls which are easy to handle and transport.
find out more
Triton TWS-EX100GM (Gas Membrane)
TWS-EX100GM is a self-adhesive membrane designed for use as a barrier against Methane and Radon gases. It also acts as a Type A waterproofing barrier.The aluminium primary barrier is reinforced and protected by the HDPE film laminated to one side and a robust bitumen rubber compound to the other.
find out more
Triton TT Vapour Membrane (Protection from Ground Gas)
A ready blended coating that once cured, provides a waterproof Radon, Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.
find out more
Ancillaries – Ground Gas
Triton supplies a full range of ancillary products for the installation of ground gas barrier systems. This range includes a venting mat, a Radon sump, primers, tapes and top hats. Situations where the Fillet Seal will be employed should already have been prepared in accordance with the slurry coating or render specification. In the majority on instances, the Fillet Seal will be applied on to the slurry coated surface.
find out more
Triton Home Dry Vents
A choice of two passive ventilation units (airbrick ventilator and core drill ventilator) that incorporate triple action filters and specially designed thermal cores for minimal heat loss. Triton Home Dry units are designed to ventilate bedrooms and living rooms where the constant background ventilation they provide allows water vapour to escape. One air brick ventilator is usually sufficient for a single room of up to 20m2 floor area, alternatively two core drill ventilators can be installed.
find out more
Isola Mestertekk
Mestertekk is a high quality single ply SBS modified bituminous roofing felt. Isola Mestertekk can be applied to all types of roofs, industrial buildings, blocks of flats and domestic housing, both on flat or pitched roofs. Isola Mestertekk is loose laid and mechanically fixed, and when used on refurbishment contracts can be applied over the original covering with minimal preparation. Isola Mesertekk is available in a range of colours – please contact Triton for more information.
find out more
Triton Elegance
A high performance, energy efficient 3-speed axial fan offering lowest energy consumption of its type in the UK. The unit provides low level continuous ventilation to control condensation. Suitable for installation in wall, ceiling or window (with additional window kit) in any domestic room. Can be speed boosted to maximum using integral pull cord or by remote switch/PIR sensor or dynamic remote humidistat. Features anti-turbulence deflectors to ensure very low noise levels and optimum performance. Compliant with Building Regulations Parts L1 2010 and F 2010 and IPX4 splashproof rated for safe installation in Zones I and II.
find out more
Triton Anti-Mould Emulsion
Triton Anti-mould Emulsion is a premium quality, low odour anti-mould coating which is guaranteed to protect against Black Mould even in cases of persistent condensation. The anti-mould biocide is combined throughout the paint film, which is formulated to impart toughness, elasticity, water resistance and durability to the surface finish.
find out more
Triton Surface Cleanser
Designed primarily to prepare and cleanse surfaces prior to the use of Triton Anti-Mould Emulsion. Supplied as a concentrate for dilution with water (1 part concentrate to 19 parts water by volume), the concentrate contains <10% w/w Quaternary Ammonium Halide dissolved in water.
find out more
Triton Aqua Pump Pro
The Triton Aqua Pump Pro is specially designed for the removal of ground water from basement cavity drain membrane systems. Comprising polyethylene sump, locking access cover and a powerful submersible pump, the system is very versatile enabling installers to locate inlets to their specifications.
find out more
Platon Xtra for pitched roofs
Platon Xtra has been used in pitched turf roof constructions for over 20 years. Aging tests indicate that the Platon membrane has an expected life of at least 50 years. The Platon membrane, the main component in the system, is manufactured from HDPE, a material that is water repellent and resistant to chemicals. The Platon membrane combined with other components, creates a complete Earth Covered Roof System.
find out more
Triton Aqua Pump Pro Plus
The Triton Aqua Pump Pro Plus is identical to the Aqua Pump Pro system above but is supplied with two mains powered pumps. These can be plumbed to either a single discharge outlet or to two separate outlets from the sump. The second mains pump is located on the raised foot within the chamber and provides back up to the primary pump and additional capacity to the system if required.
find out more
Platon DE25/DE40
Platon DE25 and DE40 membranes are designed for the construction of flat green areas on top of buildings and underground structures such as car parks and garages. They are laid between the waterproofing and soil layer. Their stud design provides an excellent function that combines drainage and water storage as one efficient system. Platon DE40 is designed for installation where high capacity water storage is required.
find out more