Liquid Applied Products
Damp proof membrane and water vapour suppressant
A solvent free, two part epoxy resin coating, typically used as a surface damp proof membrane and a water vapour suppressant. Well suited for use as a water and water proof barrier, beneath raised access floors, in plant rooms and bunded areas. It is also suitable for application on damp surfaces, such as sand/cement and cement floors subject to rising damp or containing residual construction moisture. Tri-Seal can be used as a general purpose coating for surfaces subject to foot and light wheeled traffic. Tri-Seal can be applied using a brush or medium pile roller onto sound, clean surfaces. NB New concrete subfloors or sand/cement screeds should be left for a minimum of seven days to cure before applying this product.
Triseal is available in 2.5 litre, 5 litre and 20 litre packs.
Triton TT Vapour Membrane
A ready blended coating that once cured, provides a waterproof Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.
Available in 5 and 20 litre packs.
Triton Fleece Band
Triton Fleece Band is a reinforcing fabric for use with Triton TT Vapour Membrane and is specifically designed for use within liquid applied waterproofing systems.
Available in 1m x 100m and 300mm x 100m rolls.
Triton LPA/Primer is a ready to use emulsion that can be used as a surface primer for Triton Repair Mortar, Triton Floor Levelling Compound, Triton TT Vapour Membrane and Triton RC.
Available in 5 litre packs.
A fast setting, hand applied, two pack Polyurea elastomeric resin. Designed as a high strength rigid material for use as a coating on to prepared concrete. Typical applications include waterproofing of roofs, balconies, flooring, lift pits, gutters etc where high abrasion resistance, flexibility and durability are required.
An extra fast curing, two pack Polyurea elastomeric resin with crack bridging capability. Application only by twin nozzle, heated spray unit. Typical applications include pitched and flat roofs, sewage/waste water plants, on-site applied liners, ponds, landfills, tunnels etc.