Loading

Waterproofing Systems




Concrete Waterproofing Type B Brochure


Type B Waterproofing Systems

Type B protection is defined in BS 8102: 2009 as where the structure itself is constructed as an integral water resistant shell. The water tightness of a Type B construction is reliant upon using a concrete of low permeability and appropriate joint detailing.

Downloads:

Triton Structural Waterproofing Type B Data Pack
Download (6Mb)

Download PCA Best Practice Guidance - Type B Waterproofing Systems Download (1.6Mb)

TBIC - The Basement Information Centre guidance documents

Triton TT Admix

Triton TT Super Admix picture

A unique chemical treatment for the waterproofing and protection of concrete - designed to be used as an admix at the time of batching. The active chemicals react with fresh concrete to generate a non-soluble crystalline formation which seals the concrete itself against the penetration of water or liquid, protecting it from the deterioration effect of harsh environmental conditions.

Downloads:

Triton TT Admix Data Sheet
Download (627Kb)

Triton TT Admix Material Safety Data Sheet
Download (53Kb)

TT Admix
Download BIM Object

NBS Plus Product Entry
Download (78Kb)

BBA Certificate/Product Sheet 14/5129
Download (116Kb)

Triton Structural Waterproofing Type B Data Pack
Download (6Mb)

Sealing Cable Ducts Data Sheet
Download (197Kb)

Concrete Waterproofing Type B Brochure
Download (3Mb)

Top of page



Ancillaries

Triton TT Waterstop

Triton TT Waterstop picture

A pre-formed waterstop available in a ready to use roll which swells up to 350% when in contact with water. When fully encapsulated by poured concrete, the expansive forces form a seal against concrete surfaces to resist hydrostatic pressure and to stop water from entering the sub-structures. Triton TT Waterstop returns to its original size if the concrete and substrate is completely dry but re-expands to seal the potential leaking joints when water or moisture is re-introduced. Its service life is indefinite with a permanent water tight function and excellent resistance to acid and alkaline conditions. The product is extruded in a rectangular shape for optimal adhesion. The built in delay system means Waterstop will activate approximately two days after constant exposure to water and will withstand up to a 40 metre head of pressure.

Downloads:

Triton TT Waterstop Data Sheet
Download (66Kb)

Triton TT Waterstop Material Safety Data Sheet
Download (66Kb)

TT Waterstop
Download BIM Object

TT Waterstop Detail
Download BIM Object

NBS Plus Product Entry
Download (78Kb)

Triton TT Waterstop Installation Guidelines
Download (438Kb)

Concrete Waterproofing Type B Brochure
Download (3Mb)

Top of page

Triton TT Swellmastic S2

Triton TT Swellmastic

A gun applied, one-component hydro-reactive expansion sealant for waterproofing joints in concrete. It will swell up to 100% when in contact with water to create a durable waterstop with long lasting adhesive and hydro-swelling properties. In contact with sea water, Triton TT Swellmastic S2 will expand between 50% and 70%.

Downloads:

Triton TT Swellmastic S2 Data Sheet
Download (131Kb)

TTriton TT Swellmastic S2 Material Safety Data Sheet Download (152Kb)

NBS Plus Product Entry
Download (78Kb)

Triton TT Swellmastic S2 Installation Guidelines
Download (438Kb)

Concrete Waterproofing Type B Brochure
Download (3Mb)

Top of page

Triton Injection Tube System

Triton Injection Tubes picture

The Triton Injection Tube has been designed for the multiple injection of suitable grouts into construction joints and other areas that may require injection at a later date. Constructed from a specially formulated plastic, it's flexible nature allows it to follow contours.

Key Benefits

  • Simple Installation
  • Can be injected with all known resins
  • Repeated injection possible
  • Can withstand up to 12 metres head of pressure
  • Can be installed up to 30 metre lengths

Typical Applications

  • Concrete construction joints
  • Shotcrete interfaces
  • Basement waterproofing
  • Water tanks
  • bund walls
  • Pipe penetrations
Downloads:

Triton Injection Tube Data Sheet
Download (578Kb)

Concrete Waterproofing Type B Brochure
Download (3Mb)

Top of page

Triton Repair Mortar

A pre-packed modified cement based repair mortar for use with concrete, render and screed repairs. Use with Triton LPA/Primer as both a primer to the repair area and as a gauging solution for mixing the Triton Repair Mortar and to enhance the flexural strength of the mix.

Typical areas of use would include repairs to honeycombed concrete, leaking construction joints (Triton Quick Set also required), spalled concrete and repairs to screeds and renders.

Available in 10 kg packs

Downloads:

Triton Repair Mortar Data Sheet
Download (57Kb)

Triton Repair Mortar Material Safety Data Sheet
Download (119Kb)

NBS Plus Product Entry
Download (78Kb)

Top of page

Triton Colflex

A sealing system designed to waterproof expansion/movement joints within concrete structures. Triton Colflex is a ready to use Hypalon jointing strip that forms a complete, high quality joint sealing system when used with TritonŐs Trimol 23 epoxy adhesive.

Typical applications include sealing moving joints such as expansion joints and thetreatment of isolated cracks in concrete - including cracks with large dilations.

Using Trimol 23, Colflex can be applied to wet or dry surfaces. Trimol 23 has a very high adhesion to most construction materials and a fast curing time. The Trimol 23/Colflex combination remains elastic, even at low temperatures.

Supplied in rolls: 1mm x 100mm x 20m, 1mm x 200mm x 20m

Downloads:

Triton Colflex Data Sheet
Download (147Kb)

Triton Colflex Material Safety Data Sheet
Download (61Kb)

Trimol 23/Colflex Strength Test
Download (459Kb)

Top of page