Triton Chemical Manufacturing Co. Ltd

Tel: 020 8310 3929

To complete the clause, select the appropriate wording from below. Highlighted text can be dragged and dropped to save typing.

J40 Flexible Sheet Tanking / Damp Proofing
290 High Density Polyethylene/Polypropylene Studded Damp Proof Membrane

Triton Chemical Manufacturing Co. Ltd produce a range of damp proofing products designed for a wide range of applications. The company's network of reputable contractors has access to the Triton Users Guarantee. Triton is the sole UK distributor of Isola Platon membranes, manufactured in Norway by Isola a.s., a world leader in cavity drain membranes. A complete range of polyethylene and polypropylene studded membranes is available which can be specified according to the application. The membranes work on the principle of allowing damp or running water to travel behind the membrane to a controlled drainage system.

Click on the name below to jump to the product and specification details.

Platon Multi

A BBA approved, 5mm PP cavity drain membrane, suitable for use above and below ground.

The membrane is impermeable to water, gas and water vapour and is designed for loose laying on floors and fixed to walls using special plugs and sealing material, with little or no preparation to the substrate.

Once the membrane has been fitted, walls can be dry-lined or plastered and floors can be screeded or a floating floor system installed.

The system is available with a complete off the shelf drainage system, consisting of drainage channels, sump pump and all fittings where required.

Triton also supply a complete range of butyl components, specially designed and tested for sealing joints vertically and horizontally and at the wall and floor junction.

Fixing of Platon Multi is effected using Platon Brick Plugs. Holes are drilled through the stud of the membrane and the Brick Plugs are hammered into the holes.

For applications below ground level, a seal is made behind the head of the brick plugs using Platon Sealing Rope. A minimum of five brick plugs per m2 is required.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Substrate:

Preparation: Consult with Triton Chemical for recommendations and details.

Membrane manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Platon Multi Cavity Drain Membrane.

Stud height: 5.0mm

Joints:
Platon Wall and Floor Junction / Platon Sealing Tape / Platon Overtape / Platon Corner Strip / Platon Ventilated Wall and Floor Junction.

Sealing: Platon Sealer

Accessories:
Triton Drainage System including: Channels, Channel outlet, Channel rodding eye, Triton Aqua Pump Kit, Triton Back-Up Battery Pump kit.

Platon Plaster Base

BBA approved, HDPE cavity drain membrane, suitable for use above and below ground and to receive a direct plastering finish.

Plaster Base is a single component system, with no requirement for mesh or fabric layers. The unique undercut stud design creates a mechanical key for plaster finishes.

The membrane is impermeable to water, gas and water vapour and is designed for fixing to walls and ceilings using special plugs and sealing material, with little or no preparation to the substrate.

The membrane is compatible with all other Platon products.

Once the membrane has been fitted, it is suitable for use with sand and cement renders and most lightweight and renovating plasters.

The system is available with a complete off the shelf drainage system, consisting of drainage channels, sump pump and all fittings where required.

Triton also supply a complete range of butyl components, specially designed and tested for sealing joints vertically and horizontally and at the wall and floor junction.

Fixing of Platon Plaster Base is effected using Platon Plaster Plugs. Holes are drilled through the stud of the membrane and the Plaster Plugs are hammered into the holes.

For applications below ground level, a seal is made behind the head of the brick plugs using Platon Sealing Rope. A minimum of thirteen plaster plugs per m2 is required.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Substrate:

Preparation: Consult with Triton Chemical for recommendations and details.

Membrane manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Platon Plaster Base Cavity Drain Membrane.

Stud height: 5.0mm

Joints:
Platon Wall and Floor Junction / Platon Sealing Tape / Platon Overtape / Platon Corner Strip / Platon Ventilated Wall and Floor Junction.

Sealing: Platon Sealer

Accessories:
Triton Drainage System including Channels, Channel outlet, Channel rodding eye, Triton Aqua Pump Kit, Triton Back-Up Battery Pump kit.

Platon P5

An economical 5mm HDPE cavity drain membrane, suitable for wall and floor applications, above and below ground.

The membrane is impermeable to water, gas and water vapour and is fully compatible with other Platon membranes.

P5 membrane is designed for both remedial and new build applications and can be used for sub-ground tanking and above ground to isolate walls which are damp or contaminated with salts.

After the membrane is fitted it can be dry-lined on walls and screeded or a floating floor system installed.

Fixing of Platon P5 is effected using Platon Brick Plugs. Holes are drilled through the stud of the membrane and the Brick Plugs are hammered into the holes. For applications below ground level, a seal is made behind the head of the brick plugs using Platon Sealing Rope. A minimum of five brick plugs per m2 is required. For further information contact Triton Technical Department.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Substrate:

Preparation: Consult with Triton Chemical for recommendations and details.

Membrane manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Platon P5 Cavity Drain Membrane.

Stud height: 5.0mm

Joints:
Platon Wall and Floor Junction / Platon Sealing Tape / Platon Overtape / Platon Corner Strip / Platon Ventilated Wall and Floor Junction.

Sealing: Platon Sealer

Accessories:
Triton Drainage System including Channels, Channel outlet, Channel rodding eye, Triton Aqua Pump Kit, Triton Back-Up Battery Pump kit.

Platon P20

A BBA approved, heavy-duty, deep studded HDPE membrane, used principally in floor applications and for areas of high volume water penetration.

The membrane is impermeable to water, gas and water vapour.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Substrate:

Preparation: Consult with Triton Chemical for recommendations and details.

Membrane manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Platon P20 Cavity Drain Membrane.

Stud height: 20.0mm.

Joints:
Platon Wall and Floor Junction / Platon Sealing Tape / Platon Overtape / Platon Corner Strip / Platon Ventilated Wall and Floor Junction.

Sealing: Platon Sealer

Accessories:
Triton Drainage System including Channels, Channel outlet, Channel rodding eye, Triton Aqua Pump Kit, Triton Back-Up Battery Pump kit.

Platon Double Drain

A cavity drain membrane system designed for external basement walls.

Double drain is installed with the filter fabric facing the backfill and is fixed mechanically along its top edge using a Double Drain X-Cramp, which provides tear resistant fixing points.

The Platon Top Edge Mould prevents entry of soil and stones between the wall and the membrane or onto the drainage layer.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Substrate:

Preparation: Consult with Triton Chemical for recommendations and details.

Membrane manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Platon Double Drain Cavity Drain Membrane.

Stud height: Not applicable

Sealing: Consult with Triton Chemical for recommendations and details.

Joints: Consult with Triton Chemical for recommendations and details.

Sealing: Platon Double Drain Top Edge Mould.